查看完整版本: 诺基亚西门子上海光通讯研发中心招聘信息

诺基亚西门子上海光通讯研发中心招聘信息

原西门子澳佩通信科技有限公司4月1日起正式更名为：

诺基亚西门子通信传输系统有限公司，是诺基亚西门子网络公司光通信领域在国内最主要的研发中心之一。

公司发展迅速，近期需招募大量优秀研发工程师，工作地点：上海

有意者可以发简历到：[email]pb_hr.cn@siemens.com[/email]   或    [email]pb_hr.cn@ns.com[/email]

[color=#FF7F00]R&D -- ESW Department
研发-软件研发部门[/color]

GMPLS协议软件开发工程师

工作描述:
        开发高质量的传输智能设备嵌入式协议软件
        对开发的软件质量和进度负责
        理解传输设备的标准建议，完成传输设备GMPLS嵌入式协议软件开发和集成
        按照软件工程的方法，完成软件的详细设计，代码实现，单元测试，集成测试
        从事过具体嵌入式软件开发，对嵌入式软件开发有一定经验,熟悉嵌入式OS，有 Vxworks, Linux经验者优先
        对单元测试，集成测试有较深理解

工作要求:
        熟练掌握C/C＋＋语言
        熟练掌握VxWorks/Linux嵌入式操作系统的使用,两者都熟悉者优先
        有3年以上在DCL代码平台上的GMPLS开发和集成的经验，熟悉OSPF-TE/RSVP-TE协议，有在知名通信公司工作背景者优先
        良好的沟通、协调能力，能熟练使用英语沟通

[color=#FF7F00]R&D -- SE Department
研发-系统设计部门[/color]

Senior System Engineer and System Architect
高级系统及架构设计工程师

Job Description:
        Next generation optical network solution exploration and design
        Marketing requirements and technical feasibility analysis
        Define system features and development requirements
        System architecture design

Job Requirements:
        A strong background in SDH, Data technologies is a MUST.
        At least BSEE (MSEE+ is preferred).
        3+ years experience in telecommunication product design or development.
        Comprehensive knowledge in the Carrier Ethernet, MPLS, WDM, ASON, etc. is a plus.
        Good speaking and writing skills in both Chinese and English.

Senior Data System Architect
高级数据系统架构设计师

Job Description:
        Next generation Data Network System and Optical Network System exploration and design, especially for Data/IP area
        System architecture design and specification definition

Job Requirements:
        3+ years experience in telecommunication product design or development.
        A strong background of Data technologies is a MUST.
        Design experience of carrier Ethernet system or router is well preferred.
        Comprehensive knowledge in the SDH/MSTP, Carrier Ethernet, MPLS, WDM, ASON, etc. is a plus.


Optical System Engineer
光通迅系统工程师

Job Description:
        Define the strategy of optical component and system
        Define the detailed function specification
        Long haul optical transmission planning
        Next generation optical network solution and design

Job Requirements:
        A strong background in optical component, especially SFP/XFP/Transponder/EDFA etc. is a must
        A strong system design background is well preferred
        Hardware design and development experience is a plus
        Comprehensive knowledge in the SDH/MSTP/WDM, Data etc. is a plus
        At least BSEE (MSEE+ is preferred)
        3+ years experience in telecommunication product design or development
        Good speaking and writing skills in English

[color=#FF7F00]R&D – ASIC/FPGA Design Department
研发-ASIC/FPGA设计部门[/color]

FPGA / ASIC Design Engineer
FPGA / ASIC设计工程师

Job Description:
        Whole ASIC/FPGA design flow, include specification, architecture, coding, benching, physical implementation and debugging

Job Requirements:
         Familiar with VHDL/VERILOG coding, benching, synthesis, floor plan, timing analysis, and lab debugging
         Experienced with the architecture design of complex communication AISC or FPGA
        Knowledge of SDH/SONET is a plus
        Experience in embedded software design is a plus
        Familiar with EDA tools such as DC, Simplicity, Models, etc.

[color=#FF7F00]R&D -- Hardware Design Department
研发-硬件研发部门[/color]

Circuit Pack Designer
电路板设计工程师

Job Description:   
        Participate in outlining system definition and derive the functional specification for a subsystem.
        Detailed board-level logic and schematic design, including component selection.
        Supervision of layout design, including the specification of design rules for high-speed signals. Bring-up, debug, and design characterization/verification., Release and support of transition to Manufacturing.

Job Requirements:
        BSEE (MSEE is preferred).
        3+ years experience taking board-level products successfully from design to production
        Design background in IP or ATM based Switch/Router/DSLAM equipment, or SDH equipment
        Expertise in Digital logic design, high-speed bus and clock termination and PLL clock drivers.
        Experience with designing for manufacturability, testing and reliability.
        Familiarity with standards for EMC/ESD, safety and thermal compliance.
        Knowledge of control theory, analog design, high-speed digital and optical communications, is an asset.
        PowerPC experience is a plus.
        Excellent written and oral communication skills are a must
        Desire to work in a dynamic, team-oriented start-up environment

[color=#FF7F00]R&D -- ESW Department
研发-软件研发部门[/color]

Application (SDH/Ethernet/ATM/RPR) Software Engineer01
嵌入式软件工程师Application (SDH/Ethernet/ATM/RPR)01

Job Description:
        Responsible for programming embedded real time application software (SDH/Ethernet/ATM/RPR related) for intelligent MSTP products.

Job Requirements:
        Experience in multi-task RTOS (VxWorks preferred), C/C++, TCP/IP in real time embedded system, and distributed design
        Experience on Application development of telecom/ datacom equipment embedded software includes any of the following:
        Telecom / datacom device applications:  Performance management , Fault management ,equipment management ,etc
        SDH device applications: SDH protections, DCC, etc.
        ATM device applications: Traffic Management, CAC, ATM protection, etc.
        Ethernet RPR device applications: L2 control protocols, management protocols, etc.

Driver (SDH/PDH/DWDM) Software Engineer02
嵌入式软件工程师Driver (SDH/PDH/DWDM)02

Job Description:
        Be responsible for driver development for SDH/PDH/DWDM function.

Job Requirements:
        Experience in multi-task RTOS (VxWorks preferred), C/C++, TCP/IP in real time embedded system, and distributed design, Knowledgeable in the real time software development and debugging skills
        Hands on experience in firmware / driver development on Datacom / Telecom equipment
        Knowledgeable in physical layer or data link layer, especially DWDM/SDH/SONET or ATM, Ethernet, RPR.
        Experience in driver development such as SDH Framer, LIU, Cross Connect, equipment protection, I2C, etc.
        Experience in FPGA, ASIC design is a plus.

Infra (OS Encapsulation/BSP/BSP driver) Software Engineer03
嵌入式软件工程师Infra (OS Encapsulation/BSP/BSP driver)03

Job Description:
        Responsible for develop BSP/BSP driver for telecom/datacom equipment.

Job Requirements:
        You should be experienced in multi-task RTOS (VxWorks preferred), C/C++,
        embedded system and be good at any of the following:
        Developing of BSP of Micro-Processor (PowerPC is preferred)
        Developing of I2C, EEPROM, flash driver, etc.
        Over 3 years development experience based on VxWorks
        Experience in developing of memory management, inter-application communications, system diagnostics, etc.

Network Processor Development Software Engineer04
嵌入式软件工程师Network Processor Development04

Job Description:
        Be responsible for network processor development for Ethernet function.

Job Requirements:
        Experience in multi-task RTOS (VxWorks preferred), C/C++, TCP/IP in real time embedded system, and distributed design.
        Hands on experience in firmware / driver development on Datacom / Telecom equipment.
        Knowledgeable in Ethernet or data communication.
        Experience in network processor development such as Intel NPU, IBM NPU, Xelerated NPU etc.
        Experience in microcode coding of network processor.   

Ethernet Driver Development Software Engineer05
嵌入式软件工程师Ethernet Driver Development05

Job Description:         
        Be responsible for driver development for Ethernet or Datacom function.

Job Requirements:
        Experience in multi-task RTOS (VxWorks preferred), C/C++, TCP/IP in real time embedded system, and distributed design.
        Hands on experience in firmware / driver development on Datacom / Telecom equipment.
        Knowledgeable in Ethernet or data communication.
        Experience in driver development including PHY, switch chip, router chip etc. such as Broadcom, Marvell.
        Experience in network processor or FPGA design is a plus.

Ethernet Protocol Development Software Engineer06
嵌入式软件工程师Ethernet Protocol Development06

Job Description:         
        Be responsible for protocol development for Ethernet or Datacom function.

Job Requirements:
        Experience in multi-task RTOS (VxWorks preferred), C/C++, TCP/IP in real time embedded system, and distributed design.
        Hands on experience in protocol development on Datacom / Telecom equipment.
        Knowledgeable in Ethernet or data communication.
        Experience in protocol development such as L2 protocol (OAM, xSTP, LACP etc.), L3 protocol (OSPF, IS-IS, BGP etc.), MPLS (VPLS, LDP, PWE3 etc.).

Infra (Linux) Software Engineer07
嵌入式软件工程师Infra (Linux) 07

Job Description:
        负责进行Linux 环境下的软件架构设计
        负责开发Linux 下驱动程序
        负责进行Linux 环境下操作系统封装的设计开发

Job Requirements:
        本科以上学历。
        3年以上基于Linux系统的开发经验。
        精于C/C++语言。
        熟悉linux 内核和linux 内核优化方法, 具有内核裁剪经验。
        熟悉嵌入式linux驱动程序设计和优化。
        有扎实的操作系统、微机原理、数据结构、编译原理、软件工程方面的理论基础。
        具有良好的开发习惯和学习能力，善于钻研，具有团队意识，善于与人沟通协作。
        英语CET-4以上，良好的读写与口语沟通能力。

还在裁人，又在招人，一个幌子吧？

可在51job全国首页最显眼处找到相关招聘广告。

欢迎投递简历